Gray|328 Software Revision History
Release Date Description
1.0 2006-11-10
  • Initial release.
1.1 2006-11-29
  • Added tone mode and tone crosspoint.
  • Register save push-and-hold time changed from 3 to 2 seconds.
2.0 2007-03-26
  • Audio audio output function menu.
  • Added Module Menu.
  • Added register naming and register menu.
  • Support for ESAMII monitor mute command.
  • Support for the ESAMII record crosspoint.
  • SD/HD SDI input module (304) module support.
3.0 2007-05-22
  • Support for ESAMII Auto-To/Auto-From operation.
  • Mixer operation for fader level, EQ/DYN, and Pan changed from fader-based to input-based (ie settings belong to the inputs, not the faders.)
  • Crosspoint settings moved from faders to inputs.
  • Preview uses Record Return instead of Solo. (Eliminates need for ESAMII Swap command.)
  • Remove ESAMII record crosspoint support (no longer needed.)
  • Enhanced Edit Setup Menu for Record Return and Edit Crosspoint configuration.
3.0.1 2007-07-30
  • Support for (deprecated) ESAMII two-bus transition duration commands.
  • MUTE indication on Monitor Mode menu.
  • Fixed ESAMII fader command bug.
  • Fixed Auto-To bug on Sony edit systems.
  • Fixed optional output module always defaulting to Program Out on startup.
3.0.2 (Never Released)
  • Skipped to align with Blue|328 x.0.3 release.
3.0.3 2007-08-30
  • Pan alignment feature added.
  • Support for non-DiskOnChip operation (CF card only).
3.0.4 2007-10-03
  • Fixed occasional DSP boot hang on power-on.
3.0.5 2007-11-06
  • Added register write protect support.
3.0.6 2008-03-05
  • Support for AK4395 DAC on Analog Output (313) module.
  • Various bug fixes.
3.0.7 2008-03-11
  • Fixed bug in unknown module condition.
  • Added hysteresis to the PLL lock indication in the Reference Menu.
3.1 2008-04-02
  • Added register recall next and register recall reset ESAM II commands.
  • Added support for new optional GPI input module for additional GPI inputs.
3.2 2008-04-30
  • Allows systems using DiskOnChip for the system software to switch to a Compact Flash card. Please contact Renegade Labs for information regarding switching from DiskOnChip to a Compact Flash card.
3.3.1 2008-09-12
  • Add optional output module indication on Output Menu.
  • Fixed Surround Sound Mode 2 bug.
  • Fixed firmware timing issue that caused occasional glitches in some systems at high ambient temperatures.
3.3.2 2008-10-30
  • Fixed bug in Module Menu with SDI inputs.
3.4 2009-05-28
  • Added support for SD/HD Embedder (314) module.
  • Changed optional GPI pin #4 to recall register 1.
3.5 2009-08-07
  • Added replace and cascade functionality to the SD/HD Embedder (314) module.
  • Added non-audio detection on AES (300) and AES-SRC (301) modules.
3.6 2009-12-11
  • Added external meter connector support.
  • Added audio phase for the SD/HD SDI Embedder module.
  • Enhanced the Route Menu operation.
3.7 2010-02-10
  • Added support for Status GUI.
3.7.1 2010-03-17
  • Added mixer's IP address to System Info Menu.
3.8 2010-08-12
  • Maintenance release. Fixed Analog In and DiskOnChip support issues.